Superior Quality Wire Rope Slings for Various Applications:
Our wire rope slings are designed to withstand heavy loads and demanding conditions, making them ideal for a diverse range of lifting operations. Whether you need single-leg slings, multi-leg slings, or specialized slings for specific purposes, Juli Sling has you covered. We offer a comprehensive range of wire rope slings crafted from high-quality materials to ensure strength, durability, and long-lasting performance. It is widely used in a variety of lifting, hoisting, and traction equipment.
Also the metallurgical machinery construction field. Such as cranes, construction machinery, shaft lifting, inclined shaft lifting, port loading and unloading, shipbuilding, transportation, mining industry, petroleum, marine engineering, etc.
Specifications
| Gromment Sling | ||
| Grommet sling is machined through special process by JULI independently researched and produced professional equipment. Theequipment has got the national patent (Patent No.ZL2005 2 014 1834.0) Size available: 10mm to 570mm | |
| In the form, grommet sling was spliced by the wire rope with the characters of class b or ab, fiber core, nominal tensile strengthl 1670MPa. Depending on the different working place, we should chose the rope with different surface treated, including galvanized wire rope with lubrication, galvanized wire rope without lubrication and un-galvanized, total three choices. | ||
| Choose different capability wire rope to splice the grommet sling, its breaking load is different. Shall calculate the sling's breakingl strength according to the steel wire rope construction. | ||
| Min Breaking load of grommet sling is 5 times of that working load. According to the requirements of the industry, other safety factorsl also can be applied. The safety factory of the following operation can be executed with the standard <The wire rope sling -grommet sling> GB/T30587-2014, such as the load weight is accurate calculated or measured, hoist operation is to be monitored and controlled and dynamic coefficient are limited. The same, when the diameter is 60mm or less than, take the safe factor of 5, the diameter from 60 to 150 mm take the safety factor of(6.31-0.022D), when the diameter is greater than 150 mm, safety factor should not be less than 3. | ||
| Special for limited space lifting, the shortest sling circumference should be 50 times of sling diameter. | ||
| The min, bend radius of the lifting point area should not be less than 1.5 Dia. | ||
| The angle in the form is the diagonal angle. | ||
| Nine-Strand Steel Wire Rope Sling | ||
|
| The nine-strand sling is very different from the normal slings, it remove the effect from the cable core to cable bending radius. Production range: 40mm to 320mm | |
| Enwinding uniformly steel cable and tiered construction eye enhance the loading weight of the sling, under the condition of the sametonnage, the self-weight of the sling is more lower than others. And the length shall be much shorter. | ||
| In addition, the eye parts was treated by special way, it lengthen the usage life to a great extent. | ||
| Steel Cable Splicing Sling | ||
|
| High performance cable sling is manufactured through special splicing process by JuLl independently researched and producedl professional equipment. Size available: 100mm to 500mm. | |
| Both eye parts are specially processed to extend its service life. | ||
| The minimum bend radius of the lifting point area should not be less than 1.5d. | ||
| In the form, steel cable sling was spliced by the wire rope with the characters of class a or ab, steel core, nominal tensile strengthl 1770MPa. Depending on the different working place, we should chose the rope with different surface treated, including galvanized wire rone with lubrication galvanized wire rone without lubrication and un-galvanized total three choices | ||
| When using much higher tensile strength wire rope to splice the grommet sling, the rope diameter should be smaller than the normal tension strength rope. | ||
| Pressed Steel Wire Rope Sling | ||
|
| This specification of the wire rope used for the working load: from 6mm to 60mm with construction 6x37type b-1670 | |
| Different construction of the rope means different working load, we can calculate the working load according with the steel wire rope construction which the customer required. | ||
| The sling's breaking load is 5 times of the working load. | ||
| When the wire rope diameter is up to 90mm, should be pressed two aluminum alloy joints on each end of sling. | ||
| We use one aluminum ferrule painted with the blue color as the quality ID of Juli Sling. | ||
| Double Leg Pressed Steel Wire Rope Sling | ||
|
| The specification of the wire rope in the form is 6x37+FC-1670. | |
| This form with two status working load. The 0°-90°is the priority if the customers without any special requirement. | ||
| Different construction rope with different working load, we can calculate the workingload according with the steel wire rope construction which the customer required. | ||
| Both ends of fittings with safety factor 4, and other parts safety factor is 5. | ||
| Four Legs Pressed Steel Wire Rope Sling | ||
|
| The specification of the wire rope in the form is 6x37+FC-1670. | |
| This form with two status working load. The 0°-45°is the priority if the customers without any special requirement. | ||
| Different construction rope with different working load, we can calculate the working load according with the steel wire rope construction which the customer required. | ||
| Both ends of fittings with safety factor 4, and other parts safety factor is 5. | ||
| Single-Stranded Cable | ||
| O Type Pressed Single-Stranded Cable | U Type Pressed Single-Stranded Cable | OT Type Pressed Single-Stranded Cable |
|
|
|
|
Superior Quality Wire Rope Slings for Various Applications:
Our wire rope slings are designed to withstand heavy loads and demanding conditions, making them ideal for a diverse range of lifting operations. Whether you need single-leg slings, multi-leg slings, or specialized slings for specific purposes, Juli Sling has you covered. We offer a comprehensive range of wire rope slings crafted from high-quality materials to ensure strength, durability, and long-lasting performance. It is widely used in a variety of lifting, hoisting, and traction equipment.
Also the metallurgical machinery construction field. Such as cranes, construction machinery, shaft lifting, inclined shaft lifting, port loading and unloading, shipbuilding, transportation, mining industry, petroleum, marine engineering, etc.
Specifications
| Gromment Sling | ||
|
| Grommet sling is machined through special process by JULI independently researched and produced professional equipment. Theequipment has got the national patent (Patent No.ZL2005 2 014 1834.0) Size available: 10mm to 570mm | |
| In the form, grommet sling was spliced by the wire rope with the characters of class b or ab, fiber core, nominal tensile strengthl 1670MPa. Depending on the different working place, we should chose the rope with different surface treated, including galvanized wire rope with lubrication, galvanized wire rope without lubrication and un-galvanized, total three choices. | ||
| Choose different capability wire rope to splice the grommet sling, its breaking load is different. Shall calculate the sling's breakingl strength according to the steel wire rope construction. | ||
| Min Breaking load of grommet sling is 5 times of that working load. According to the requirements of the industry, other safety factorsl also can be applied. The safety factory of the following operation can be executed with the standard <The wire rope sling -grommet sling> GB/T30587-2014, such as the load weight is accurate calculated or measured, hoist operation is to be monitored and controlled and dynamic coefficient are limited. The same, when the diameter is 60mm or less than, take the safe factor of 5, the diameter from 60 to 150 mm take the safety factor of(6.31-0.022D), when the diameter is greater than 150 mm, safety factor should not be less than 3. | ||
| Special for limited space lifting, the shortest sling circumference should be 50 times of sling diameter. | ||
| The min, bend radius of the lifting point area should not be less than 1.5 Dia. | ||
| The angle in the form is the diagonal angle. | ||
| Nine-Strand Steel Wire Rope Sling | ||
|
| The nine-strand sling is very different from the normal slings, it remove the effect from the cable core to cable bending radius. Production range: 40mm to 320mm | |
| Enwinding uniformly steel cable and tiered construction eye enhance the loading weight of the sling, under the condition of the sametonnage, the self-weight of the sling is more lower than others. And the length shall be much shorter. | ||
| In addition, the eye parts was treated by special way, it lengthen the usage life to a great extent. | ||
| Steel Cable Splicing Sling | ||
|
| High performance cable sling is manufactured through special splicing process by JuLl independently researched and producedl professional equipment. Size available: 100mm to 500mm. | |
| Both eye parts are specially processed to extend its service life. | ||
| The minimum bend radius of the lifting point area should not be less than 1.5d. | ||
| In the form, steel cable sling was spliced by the wire rope with the characters of class a or ab, steel core, nominal tensile strengthl 1770MPa. Depending on the different working place, we should chose the rope with different surface treated, including galvanized wire rone with lubrication galvanized wire rone without lubrication and un-galvanized total three choices | ||
| When using much higher tensile strength wire rope to splice the grommet sling, the rope diameter should be smaller than the normal tension strength rope. | ||
| Pressed Steel Wire Rope Sling | ||
|
| This specification of the wire rope used for the working load: from 6mm to 60mm with construction 6x37type b-1670 | |
| Different construction of the rope means different working load, we can calculate the working load according with the steel wire rope construction which the customer required. | ||
| The sling's breaking load is 5 times of the working load. | ||
| When the wire rope diameter is up to 90mm, should be pressed two aluminum alloy joints on each end of sling. | ||
| We use one aluminum ferrule painted with the blue color as the quality ID of Juli Sling. | ||
| Double Leg Pressed Steel Wire Rope Sling | ||
|
| The specification of the wire rope in the form is 6x37+FC-1670. | |
| This form with two status working load. The 0°-90°is the priority if the customers without any special requirement. | ||
| Different construction rope with different working load, we can calculate the workingload according with the steel wire rope construction which the customer required. | ||
| Both ends of fittings with safety factor 4, and other parts safety factor is 5. | ||
| Four Legs Pressed Steel Wire Rope Sling | ||
|
| The specification of the wire rope in the form is 6x37+FC-1670. | |
| This form with two status working load. The 0°-45°is the priority if the customers without any special requirement. | ||
| Different construction rope with different working load, we can calculate the working load according with the steel wire rope construction which the customer required. | ||
| Both ends of fittings with safety factor 4, and other parts safety factor is 5. | ||
| Single-Stranded Cable | ||
| O Type Pressed Single-Stranded Cable | U Type Pressed Single-Stranded Cable | OT Type Pressed Single-Stranded Cable |
|
|
|
|
