Mud Pump Crankshaft Assy
Crankshaft is spare part of mud pump
Crankshaft is an eccentric shaft made from casting alloy steel.Herringbone gear ring ,
connection rod and bearing are mounted on it .The gear ring is herringbone.When assembly, the herringbone gear ring and the crankshaft are of interference fit and fastened with bolts and nuts.
Big end of connection rod is mounted on three eccentric straps of the crankshaft via single row cylindrical roller bearing. Small end is mounted on crosshead pin via double row long cylindrical roller bearing. Double row radial spherical roller bearings are mounted at either end of the crankshaft.
Available for Mud Pump Models
|BOMCO ||F-500 ||F-800 ||F-1000 ||F-1300 ||F-1600 ||F-1600L ||F-2200L |
|LANSHI ||F-500 ||F-500 ||F-500 ||F-1300 ||F-1600/F-1600L ||F-1600H || |
| ||3NB500C ||3NB1000C ||3NB1300C ||3NB1600 || || || |
| ||P-800 ||P-1000 ||P-1300 ||P-1600 ||P-2200 || || |
|HONGHUA ||HHF-500 ||HHF-800 ||HHF-1000 ||HHF-1300 ||HHF-1600 ||HHF-1600HL ||HHF-2200HL |
|RONGSHENG (RS) ||RSF-500 ||RSF-800 ||RSF-1000 ||RSF-1300 ||RSF-1300L ||RSF-1600 ||RSF-1600HL |
|RG ||RGF-500 ||RGF-800 ||RGF-1000 ||RGF-1300 ||RGF-1600 || || |
|QINGZHOU (QZ) ||QZF-500 ||QZF-800 ||QZF-1000 ||QZF-1300 ||QZF-1600 || || |
| ||QZ3NB-800 ||QZ3NB-1000 ||QZ3NB-1300 ||QZ3NB-1300A ||QZ3NB-1600 || || |
|RONGLI (RL) ||RL-F500 ||RL-F800 ||RL-F1000 ||RL-F1300 ||RL-F1600 ||RL-F2200 || |
| ||RL-3NB350 ||RL-3NB500(A) ||RL-3NB600 ||RL-3NB800 ||RL-3NB1000 (A/D) ||RL-3NB1300 (A/D) ||RL-3NB1600 |
|TSC ||WF-400 ||WF-450 ||WF-700 ||WF-1000 ||WF-1600 || || |
|EMSCO ||F-350/500 ||F-650 ||F-800 ||F-1000 ||F-1300 ||F-1600 || |
| ||FA 1300 ||FB-1300 ||FA-1600 ||FB-1600 ||DB-550 ||D-300 ||D-700 |
|NATIONAL ||8-P-80 ||9-P-100 ||10-P-130 ||12-P-160 ||14-P-220 || || |
|OILWELL ||A-600-PT ||A-850-PT ||A-1100-PT ||A-1400-PT ||A-1700-PT || || |
| ||A-350 ||A-560 ||A-650 ||A-850 ||A-1100 ||A-1400 ||A-1700 |
|IDECO ||T-500 ||T-800 ||T-1000 ||T-1300 ||T-1600 || || |
|WIRTH ||TPK-1000 ||TPK-1300 ||TPK-1600 ||TPK-2000 ||TPK-2200 || || |
|ELLS WILLIAMS ||E-447 ||E-2200 ||W440 ||W446 || || || |
|GARDNER DENVER ||PZ-7 ||PZ-8 ||PZ-9 ||PZ-10 ||PZ-11 ||PZ-L ||PA-8 |
| ||FY-FXD ||FO-FXO ||FD-FXX ||FG-GXG || || || |
|RUSSIA PUMPS ||UNBT 650 ||UNBT 950 ||UNBT 1180L ||UNB 600 ||NBT 600 ||ETC. || |
The bi-metal liner is composed of two layers and fixed tightly. The outer sleeve is forged steel with abrasion resistance, it adapts the technology of centrigugal forging; the inner sleeve is high chromium iron with wear&corrosion resistance, after heat treatment, the hardness of it can reach to a lever of 62 RC.
The bi-metal liners produced by us strictly control the tolerance, assure the easy installation, inner sleeve is highly polished with abrasion&corrosive resistance, can used in various bad working environment with longer service life.
Liner Outer Sleeve: 45#forged steel, tensile strength is σb>610MPa, yield strength is σs>450MPa, ,elongation hardness is §>17%,hardness is HRC180-200
Liner Inner Sleeve: high chromium cast iron (centrifugal forged). Annealing hardness is HRC≤40. Quenching hardness is HRC59-67
Chemical Composition:C 2.8%-3.1% Cr 26%-28% Si 0.6%-0.9% Mn 0.5%-1% Mo 0.5%-0.8% S , P <0.05%;<><0.05%;<><0.05%;<><0.05%;<><0.05%;<><0.05%;<><0.05%;<><0.05%;<><0.05%;<><0.05%;<><0.05%;<><0.05%;<>
Hebel Xinhuafa Petroleum Machinery Co. LTD was established in 2006,with 5000m2 plant.The company focuses on R&D of mud pump fittings and several R&D results were horned with awards as well as patented for invention. The company is engaged in product design, manufacturing and service on all the quality oilfield replacement parts, including mud pump fluid end parts including Fluid end modules, liners, pistons, valves,&seats, extension rods, piston rods, valve covers etc.
The company holds a professional technical team and is equipped with advanced machineries,improving the technical skills and updating product quality,
Our products are certified by ISO9001 quality control. We supply products not only our oilfields company of domestic, but also dozens of countries all over the world, such as USA, Russia, Indonesia and Iran. With several years' persistence, we are widely accepted as a professional supplier of high quality mud pump cylinder liners and other parts in fluid end modules.
We supply mud pump spare parts like mud pump liner including zirconia ceramic liner and high chrome bimetallic liner, Mono-metal Liner, fluid end module, valve and seats, piston, piston rod, pony rod etc. parts for mud pump, we can also customize and machine as your drawing.
|Our advantage ||Deep engaged in the industry for 16 years. |
|Short delivery time, fast delivery. |
|Integration of industry and trade, stable quality, super cost-effective, annual output of 100,000 +. |
|Sound quality management system and perfect after-sales service system. |
|Hebei Xinhuafa Petroleum Machinery Co.,Ltd focuses on R&D of mud pump fittings and several R&D results were horned with awards as well as patented for invention. The company is engaged in product design, manufacturing and service on all the quality oilfield replacement parts, including mud pump fluid end parts including Fluid end modules, liners, pistons, valves,&seats, extension rods, piston rods, valve covers etc. | Welcome to visit our company at any time!
|Company ||Hebel Xinhuafa Petroleum Machinery Co. LTD |
|Address ||Chang'an District,Shijiazhuang,Hebei,China |
|Contacts ||Anne Yang |
| || |
|Mobile ||+8615633571027 |
Anne Yang (Ms.)
Overseas Business Dept.
Hebei Yingpai Import & Export Trading Co., Ltd.( a subsidiary export company of Hebei Xinhuafa petroleum Machinery Co.,Ltd.)
Add: Chang'an District, Shijiazhuang, Hebei, China