Wellhead manual pliers
Product Description
Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of the tongs.
They are completely interchangeable with other major manufacturer's tongs (Varco BJ, Woolley, and National Oilwell Varco). Each tong features tough, heavy -duty designs with heat-treated hinge pins and long-lasting "stagger tooth" tong dies (Blue Diamond, Pyramid). They are designed and manufactured according to API Spec 7K.
TYPE SDD Manual Tongs (HT 100)
No.of Latch Lug Jaw | No.of Hinge Pin Hole | Latch Step | Size Range | Rated Torque | ||
in | mm | K▪Nm | ||||
l | 1 | 4-5 1/2 | 101.6-139.7 | 100000 | 140 | |
2 | 139.7-146 | |||||
ll | 1 | 5 1/2-6 5/8 | 139.7-168.3 | |||
2 | 6 1/2-7 1/4 | 165.1-184.2 | ||||
lll | 1 | 6 5/8-7 5/8 | 168.3-193.7 | |||
2 | 7 3/4-8 1/2 | 196.9-215.9 | ||||
2 # | l | 1 | 8 1/2-9 | 215.9-228.6 | ||
2 | 9 1/2-10 3/4 | 241.3-273 | ||||
ll | 2 | 10 3/4-12 | 273-304.8 | |||
3 # | l | 1 | 12-12 3/4 | 304.8-323.8 | 70000 | 100 |
ll | 1 | 13 3/8-14 | 339.7-355.6 | |||
2 | 15 | 381 | ||||
4 # | ll | 1 | 15 3/4 | 400 | 60000 | 80 |
5 # | ll | 1 | 16 | 406.4 | ||
2 | 17 | 431.8 |
TYPE DB Manual Tongs (HT 65)
No.of Latch Lug Jaw | No.of Hinge Pin Hole | Size Range | Rated Torque | ||
in | mm | lb▪ft | K▪Nm | ||
1 # | I | 3 1/2-6 | 88.9-152 | 65000 | 90 |
II | 5 3/4-7 | 146-178 | |||
III | 6 5/8-8 1/4 | 168-210 | |||
2 # | I | 8-9 5/8 | 203-244 | ||
II | 10 5/8-11 1/4 | 270-286 | |||
3 # | I | 11 3/4-12 3/4 | 298-324 | 40000 | 55 |
II | 13 3/8-14 3/8 | 340-365 | |||
4 # | II | 16-17 | 406-432 |
TYPE SB Manual Tongs (HT 55)
No.of Latch Lug Jaw | Latch Step | Size Range | Rated Torque | ||
in | mm | lb▪ft | K▪Nm | ||
1 | 3 1/2-4 1/8 | 88.9-104.78 | 55000 | 75 | |
2 | 4 1/8-5 | 104.78-127 | |||
2 # | 1 | 4 1/4-5 1/4 | 107.95-133.35 | ||
2 | 5-5 3/4 | 127-146.05 | |||
3 | 6-6 3/4 | 152.4-171.45 | |||
3 # | 1 | 6 5/8-7 1/4 | 168.28-184.15 | ||
2 | 7 3/8-8 | 187.33-203.2 | |||
3 | 8 1/2-9 | 215.9-228.6 | |||
4 # | 1 | 9-9 5/8 | 228.6-244.48 | 40000 | 55 |
2 | 10 5/8-10 3/4 | 269.88-273.05 | |||
5 # | 1 | 11 3/4 | 298.45 | ||
6 # | 1 | 12 3/4-13 | 323.85-330.2 | 30000 | 40 |
7 # | 1 | 13 3/8 | 339.73 |
TYPE AAX Manual Tongs
No.of Latch Lug Jaws | Size Range | Rated Torque | ||
in | mm | lb▪ft | K▪Nm | |
1 # | 2 7/8-3 3/4 | 73-95.25 | 40000 | 55 |
2 # | 3 1/2-4 1/2 | 88.9-114.3 | ||
3 # | 4 1/4-5 1/4 | 107.95-133.35 | 55000 | 75 |
4 # | 5-7 | 127-177.8 | ||
5 # | 6 7/8-8 5/8 | 174.6-219.1 | ||
6 # | 9-10 3/4 | 228.6-273.05 | 30000 | 40 |
7 # | 10 3/4-11 3/4 | 273.05-298.45 | ||
8 # | 13 3/8 | 339.7 |
TYPE WWB Manual Tongs
Size Range | Rated Torque | |||
in | mm | lb▪ft | K▪Nm | |
1 # | 2 3/8-3 3/4 | 60.3-95.25 | 35000 | 48 |
2 # | 3 1/2-4 5/8 | 88.9-117.48 | ||
4 1/2-5 3/4 | 114.3-146.05 | |||
4 # | 5 1/4-7 1/4 | 133.35-184.15 | ||
5 # | 6 7/8-8 5/8 | 174.63-219.08 | ||
6 # | 9-10 3/4 | 228.6-273.05 | 25000 | 35 |
TYPE C Manual Tongs (HT 35)
No. of Latch Lug Jaws | Short Jaw | No. of Hinge Jaw | Size Range | Rated Torque | ||
in | mm | Lb▪ft | kN▪m | |||
1# | 2 3/8-7 | / | 2 3/8-3.668 | 60.33-93.17 | 15,000 | 20 |
2# | 2 7/8-4 1/4 | 73.03-108 | ||||
3# | 3 1/2-5 1/4 | 88.9-133.35 | 25,000 | 35 | ||
4# | 7-8 5/8 | 139.7-177.8 | 35,000 | 48 | ||
5# | 1# | 9 5/8-10 3/4 | 177.8-219.08 | 25,000 | 35 | |
6# | 7 3/8-10 3/4 | 2# | 244.5-273.05 | 32,000 | 44 |
Extended Casing Tongs
Casing tong is necessary to make up or break out the screws of casing and casing couplings. The handing size of casing tong can be adjusted by changing the lug jaw. The available range of casing tong is from 13 3/8 inch to 30 inch.
Pipe Size | Rated Torque | ||
mm | in | K▪Nm | |
340-368 | 13 3/8-14 1/2 | 25000 | 35 |
368-406 | 14 1/2-16 | ||
406-445 | 16-17 1/2 | ||
445-483 | 17 1/2-19 | ||
483-508 | 19-20 | ||
508-546 | 20-21 1/2 | ||
546-584 | 20 1/2-23 | ||
610-648 | 24-25 1/2 | ||
648-686 | 25 1/2-27 | ||
686-724 | 27-28 1/2 | ||
724-762 | 28 1/2-30 | ||
762-800 | 30-31 1/2 | ||
800-838 | 31 1/2-33 | ||
838-876 | 33-34 1/2 | ||
876-915 | 34 1/2-36 |