API 600HP Factory High Pressure Cementing Plunger Pump for Oil Well Injection
Product Description
600L is a reciprocating, Volumetric, single acting and horizontal three-cylinder plunger pump, with maximum input braking power of 600HP. The pump is widely used in in intermittent well operations such as acidification, cementing, fracturing, well killing and etc.
Direction for use
* Consisit of a Power end assembly, a fluid end assembly and a reduction gearbox assembly.
* The gearbox could be mounted either on right or left side of the pump. ( There are 16 different positions for installation)
* Different plunger sizes (3'', 3 1/2'', 4'', 4 1/2'') to achieve different flow rate under different pressure.
* The gearbox could be mounted either on right or left side of the pump. ( There are 16 different positions for installation)
* Different plunger sizes (3'', 3 1/2'', 4'', 4 1/2'') to achieve different flow rate under different pressure.
| Performance Parameters under Different Operation Conditions | ||||||||||
Plunger Size mm | (rpm) | |||||||||
| 50 | 120 | 200 | 300 | 450 | ||||||
| Flow GPM (L/min) | Pressure Psi (MPa) | Flow GPM (L/min) | Pressure Psi (MPa) | Flow GPM (L/min) | Pressure Psi (MPa) | Flow GPM (L/min) | Pressure Psi (MPa) | Flow GPM (L/min) | Pressure Psi (MPa) | |
| 3" (76.2) | 28 (104) | 14141 (97.5) | 66 (250) | 14098 (97.2) | 110 (417) | 8456 (58.3) | 165 (625) | 5642 (38.9) | 248 (938) | 3756 (25.9) |
| 3.5" (88.9) | 37 (142) | 10399 (71.7) | 90 (341) | 10341 (71.3) | 150 (568) | 6208 (42.8) | 225 (851) | 4148 (28.6) | 337 (1277) | 2756 (19) |
| 4" (101.6) | 49 (185) | 7962 (54.9) | 118 (445) | 7919 (54.6) | 196 (741) | 4757 (32.8) | 294 (1112) | 3176 (21.9) | 441 (1668) | 2118 (14.6) |
| 4.5" (114.3) | 62 (235) | 6295 (43.4) | 149 (563) | 6266 (43.2) | 248 (938) | 3756 (25.9) | 372 (1407) | 2509 (17.3) | 558 (2111) | 1668 (11.5) |
| Input Power | 188kW | 447kW | 447kW | 447kW | 447kW | |||||