The truck-mounted drilling rigs series from Yingpai Drilling Machinery can cover the drilling depth of 1000m-4000m and the maximum static load of 900kN-2250kN. Drilling operations for shallow and medium-deep wells. Additionally, rigs are available for arctic, desert and high altitude applications. Learn More
● YMC truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotary drilling rig.
● The truck chassis adopts the special crane chassis of brand CHANA TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
● This rig is a rotary drilling rig with directional circulation. It is equipped with 3NB-130 plunger pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.● The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.
| Technical parameter | |||
| Drilling depth(M) | 600 | ||
| Drilling diameter(mm) | 500 | ||
| Speed of turntable(r/min) | 117;102;60;38;22;13;16(reverse) | ||
| Torque of turntable(KN.m) | 5.4----50 | ||
| Single rope lifting capacity of main windlass(KN) | 50 | ||
| Maximum lifting capacity of main windlass(KN) | 300 | ||
| Single rope lifting capacity of assistant windlass(KN) | 60 | ||
| Single rope lifting capacity of assistant windlass(KN) | 240 | ||
| The lifting capacity of hook(KN) | 300 | ||
| Bearing capacity of drilling tower (KN) | 300 | ||
| The height of drilling tower (mm) | 15500 | ||
| Drill pipe | Kelly bar(mm) | 108×108×10500 | |
| Assistant pipe (mm) | .Ф89×10×9000 | ||
| 3NB-130 plunger pump | Diameter of cylinder (mm) | 140 | |
| Stroke of piston (mm) | 160 | ||
| Theoretical flow (L / min) | 1000 | ||
| Rated pressure (Mpa) | 5 | ||
| Diameter of suction tube (mm) | 152 | ||
| Diameter of drain pipe (mm) | 65 | ||
| Input power (kw) | 95 | ||
| Truck chassis | Drive form | 8×6 | |
| Engine | Model | YC6A260-33YC water -cooled four strok diesel engine | |
| Rated power(KW) | 191 | ||
| Speed (r/min) | 2300 | ||
| Size (L*W*H)(mm) | 11510*2480*2800 | ||
| Electric generator | Model | MF | |
| Rated power (kw) | 30 | ||
| Rated voltage(v) | 380 | ||
| Rated current(A) | 27 | ||
| Speed (r/min) | 1500 | ||
| Frequency(Hz) | 75 | ||
| The highest speed(Km/h) | 75 | ||
| Weight (kg) | 27500 | ||
| Transport size(L*W*H)(mm) | 15543×2480×4032 | ||
| Working size(L*W*H)(mm) | 11139×2480×16749 | ||
The engineers team from Yingpai Drilling Machinery thrives on working with drillers as they continue to innovate products and designs for truck mounted drillers. Our goal is to make your work faster, safer and more efficient. Partner with us and we'll work to reduce your drilling truck downtime.
The truck-mounted drilling rigs series from Yingpai Drilling Machinery can cover the drilling depth of 1000m-4000m and the maximum static load of 900kN-2250kN. Drilling operations for shallow and medium-deep wells. Additionally, rigs are available for arctic, desert and high altitude applications. Learn More
● YMC truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotary drilling rig.
● The truck chassis adopts the special crane chassis of brand CHANA TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
● This rig is a rotary drilling rig with directional circulation. It is equipped with 3NB-130 plunger pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.● The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.
| Technical parameter | |||
| Drilling depth(M) | 600 | ||
| Drilling diameter(mm) | 500 | ||
| Speed of turntable(r/min) | 117;102;60;38;22;13;16(reverse) | ||
| Torque of turntable(KN.m) | 5.4----50 | ||
| Single rope lifting capacity of main windlass(KN) | 50 | ||
| Maximum lifting capacity of main windlass(KN) | 300 | ||
| Single rope lifting capacity of assistant windlass(KN) | 60 | ||
| Single rope lifting capacity of assistant windlass(KN) | 240 | ||
| The lifting capacity of hook(KN) | 300 | ||
| Bearing capacity of drilling tower (KN) | 300 | ||
| The height of drilling tower (mm) | 15500 | ||
| Drill pipe | Kelly bar(mm) | 108×108×10500 | |
| Assistant pipe (mm) | .Ф89×10×9000 | ||
| 3NB-130 plunger pump | Diameter of cylinder (mm) | 140 | |
| Stroke of piston (mm) | 160 | ||
| Theoretical flow (L / min) | 1000 | ||
| Rated pressure (Mpa) | 5 | ||
| Diameter of suction tube (mm) | 152 | ||
| Diameter of drain pipe (mm) | 65 | ||
| Input power (kw) | 95 | ||
| Truck chassis | Drive form | 8×6 | |
| Engine | Model | YC6A260-33YC water -cooled four strok diesel engine | |
| Rated power(KW) | 191 | ||
| Speed (r/min) | 2300 | ||
| Size (L*W*H)(mm) | 11510*2480*2800 | ||
| Electric generator | Model | MF | |
| Rated power (kw) | 30 | ||
| Rated voltage(v) | 380 | ||
| Rated current(A) | 27 | ||
| Speed (r/min) | 1500 | ||
| Frequency(Hz) | 75 | ||
| The highest speed(Km/h) | 75 | ||
| Weight (kg) | 27500 | ||
| Transport size(L*W*H)(mm) | 15543×2480×4032 | ||
| Working size(L*W*H)(mm) | 11139×2480×16749 | ||
The engineers team from Yingpai Drilling Machinery thrives on working with drillers as they continue to innovate products and designs for truck mounted drillers. Our goal is to make your work faster, safer and more efficient. Partner with us and we'll work to reduce your drilling truck downtime.